Newsletter

Subscribe to the free Z+F e-mail newsletter and regularly read interesting articles about laser scanning.

> Un-/Subscribe the Newsletter
Example of an chemical plant
Pipes inside a refinery

Existing factory workshops and industrial plants can be surveyed three-dimensionally in detail. For new buildings, further extensions and reconstruction in the future, there are spatial coordinates available which are accurate to a millimeter, from which two-dimensional construction plans can easily be drawn.

For more information, please read our case study about Ramboll.

For more information, please read our case study about Scopus.


Generation of 3D models

From the data gathered by Z+F laser scanner systems and with the LFM software, 3D models of the actual state of the factory or plant (e.g. tubes, steel girders) can be generated. Furthermore, it is possible to generate complete CAD models from the 3D scan data (the so-called point cloud).

Clash detection

It is possible to simulate manufacturing processes and to carry out collision checks with 3D models. Example: Another production robot of the same type has to be added to an
existing plant.

Facility management

All fixed equipment like cables or tubes is surveyed as well and saved in a 3D database which serves as the basis for future reconstruction. This database can be updated and extended at any time.

Benefits of using Z+F laser scanners

By using phase based Z+F laser scanners in virtual factory and industrial plant planning, compromise solutions and resulting bottlenecks can be avoided. The down-times during the gathering of data are reduced to a minimum due to the fast, high-resolution and light-independent surveying.
The potential savings for new buildings and reconstruction work have been projected in independent studies carried out by different automobile manufacturers with up to 15% of the overall investment amount.

News

BauScan 2017

20.09.17

BauScan 2017 will take place from 16 - 17 November 2017 at the Magdeburg University.

Autodesk University Germany 2017

20.09.17

Autodesk University will be held in Darmstadt, from October 17-18, 2017.

INTERGEO 2017

09.06.17

September 26-28, Messe Berlin, in Berlin

DIGILITY CONFERENCE & EXPO COLOGNE

09.06.17

It’s about time to enter new realities again …For the 2nd time DIGILITY Conference & Expo will open its doors on...