|
Please
move the mouse over the scanner den dyger .
Z+F IMAGER® 5006h 
With the Z+F IMAGER® 5006h, Z+F presents the world’s fastest profile-scanning 3D-laser measurement system with a data acquisition rate of 1,016,727 Pixel/Second. It can be used in the operating temperature range of -10°C to +45°C. The unique stand-alone-concept allows scanning up to 2.5 hours before the integrated battery has to be changed. Therefore it is the ideal scanner to increase productivity and flexibility of your daily scanning projects.
The unique features of the Z+F IMAGER® 5006h
| • |
Data acquisition rate of 1,016,727 Pixel/Second |
| • |
Ambiguity interval up to 79 meter |
| • |
Reduced range noise and improved point cloud quality |
| • |
High accuracy in the millimeter range |
| • |
Resolution up to 100,000 points/360° |
| • |
Temperature range -10°C to 45°C |
| • |
Wireless scanning due to internal data storage and integrated power supply |
| • |
Electronic tilt sensor |
| • |
WLAN, Ethernet and USB interfaces |
| • |
Operation of the Z+F IMAGER® 5006h by keyboard-display combination |
| • |
Compact and ligth weight design |
| • |
Mounting onto the Wild/Leica tribrach system |
Unique opportunities of operation
No matter which application or condition the laser scanner is used for, the Z+F IMAGER® 5006h offers you the perfect scanning opportunities for your project.
The integrated control panel with display enables unlimited operation of the scanner without any further hardware. Your main advantage: Easy handling and high productivity.
If required by the operator, it is of course also possible to operate the Z+F IMAGER® 5006h via the existing operating software, Z+F LaserControl, which is possible with a notebook or a regular PC via an ethernet connection.
The Z+F IMAGER® 5006h is capable of “scan over IP“. While it is connected to the internet, the scanner can be operated from anywhere in the world.
Flexible power supply
The Z+F IMAGER® 5006h offers three different possibilities of power supply. Every scanner is equipped with a built in interchangeable battery pack. Furthermore the existing external battery packs (TRAPP 15-24) or the power supply station (KNL) can be used. Both devices are already in use for the Z+F IMAGER® 5003. With the TRAPP 15-24, about six hours of scanning are possible. The different power supplies can be swapped while working with the scanner.
Compact and lightweight design
With the convenient carrying handle, compact design and low weight (less than 14 kg for the scanner and the battery pack), the Z+F IMAGER® 5006h is an absolutely mobile measuring instrument. A standard tripod is the only piece of equipment which is additionally necessary for ordinary scanning.
"STAND ALONE" concept - easiest handling and high productivity
The Z+F IMAGER® 5006h is the first true “stand alone“ laser scanner, worldwide. The integrated hard disk and power supply and the innovative operating methods, enable a completely wireless operation. With these features and its compact design the Z+F IMAGER® 5006h guarantees a very cost-effective way of scanning. The high ambiguity interval of a maximum of 79 meter and the good quality of the point clouds improve the measurement and reduce post-processing in the office.
Download
Extensive
accessories
We offer extensive accessory assortments for
the Z+F IMAGER® 5006h.
Please have a
look on the following page: equipment
|
