Example of an chemical plant
Pipes inside a refinery

Existing factory workshops and industrial plants can be surveyed three-dimensionally in detail. For new buildings, further extensions and reconstruction in the future, there are spatial coordinates available which are accurate to a millimeter, from which two-dimensional construction plans can easily be drawn.

For more information, please read our case study about "Ramboll".

For more information, please read our case study about "Scopus".

Generation of 3D models

From the data gathered by Z+F laser scanner systems and with the LFM software, 3D models of the actual state of the factory or plant (e.g. tubes, steel girders) can be generated. Furthermore, it is possible to generate complete CAD models from the 3D scan data (the so-called point cloud).

Clash detection

It is possible to simulate manufacturing processes and to carry out collision checks with 3D models. Example: Another production robot of the same type has to be added to an
existing plant.

Facility management

All fixed equipment like cables or tubes is surveyed as well and saved in a 3D database which serves as the basis for future reconstruction. This database can be updated and extended at any time.

Benefits of using Z+F laser scanners

By using phase based Z+F laser scanners in virtual factory and industrial plant planning, compromise solutions and resulting bottlenecks can be avoided. The down-times during the gathering of data are reduced to a minimum due to the fast, high-resolution and light-independent surveying.
The potential savings for new buildings and reconstruction work have been projected in independent studies carried out by different automobile manufacturers with up to 15% of the overall investment amount.


The new Z+F PROFILER® 9020


Mapping the future

From 02.11. to 05.11.2020 EuroMed


We would like to invite you to the EuroMed 2020 (https://www.euromed2020.eu/workshops), the international conference on...

Q+A session at the INTERGEO® digital 2020


From 13.10. to 15.10.2020

INTERGEO® digital 2020 - we are on stage -


From 13th to 15th October 2020